Select Page

Meet students researching biofuels, batteries and more

by | Nov 3, 2025 | Features, Students

Shira Shecter (right) examines a substance in a flask while Arul Mozhy Varman (left), an associate professor of chemical engineering in the Ira A. Fulton Schools of Engineering at Arizona State University, observes. Shecter, a Fulton Schools chemical engineering undergraduate student, is one of many Fulton Undergraduate Research Initiative, or FURI, students participating in the Fulton Forge Student Research Expo for fall 2025. Photographer: Erika Gronek/ASU

This article is part one of a two-part series highlighting student researchers presenting at the Fall 2025 Fulton Forge Student Research Expo on Tuesday, Nov. 18, 2025. Read part two on Monday, Nov. 10, 2025, and learn more about the expo.

Improving battery performance data analysis software, accelerating bacteria production to create biofuels faster, reducing harmful algal blooms and optimizing semiconductor manufacturing processes are just some of the ways Arizona State University students are addressing practical challenges through hands-on research.

Undergraduate and graduate students in the Ira A. Fulton Schools of Engineering at ASU have several opportunities to conduct research that has real-world impact. Through individual projects mentored by Fulton Schools faculty members, students apply their classroom knowledge, build new skills and forge meaningful advances in the research themes of data science, education, energy, health, security, semiconductor manufacturing and sustainability.

In the Fulton Undergraduate Research Initiative, also known as FURI, and the Master’s Opportunity for Research in Engineering, or MORE, programs, participants conceptualize ideas, develop plans and investigate research questions during a semester.

Students participating in the Grand Challenges Scholars Program, or GCSP, can apply for additional funding to conduct research through the GCSP research stipend program. Conducting research is one part of the rigorous GCSP competency requirements designed to prepare students to solve the world’s most complex societal challenges.

These three programs enhance students’ ability to innovate, think independently and solve problems in their communities. They also benefit from the technical and soft skills they gain, which prepare them for their careers and the pursuit of advanced degrees.

Each semester, students who participate in FURI, MORE and the GCSP research stipend program are invited to present their findings at the Fulton Forge Student Research Expo.

Meet four of the research participants highlighted below and more than 100 other student investigators at the Fall 2025 Fulton Forge Student Research Expo, which is open to the public, on Tuesday, Nov. 18, from 1 to 3 p.m. in the Memorial Union on the ASU Tempe campus.

Zeyad George in lab

Photographer: Erika Gronek/ASU

Zeyad George

Zeyad George, an undergraduate Fulton Schools student majoring in electrical engineering, began participating in FURI due to the influence of one of his instructors. Yoon Hwa, a Fulton Schools assistant professor of electrical engineering, taught one of George’s classes and helped him get started in FURI. Now, under Hwa’s supervision, George is conducting research that aims to improve data collection from lithium-ion, or Li-ion, batteries.

Read more

What made you want to get involved in this program? Why did you choose the project you’re working on?

I wanted to participate in research for a while before taking Professor Hwa’s class. He helped me get into FURI and aided me with the basics. He showed me around the lab, and while most of his work is tied to materials science, my electrical engineering skills are useful for certain models of Li-ion cells and programming.

How will your engineering research project impact the world?

As vehicles and handheld electronics only become more dependent on Li-ion cells, much research is done on improving their efficiency and performance. Therefore, there is an abundance of data collected from cell testing and a need for a tool that can easily manipulate it and use it for comparisons.

How do you see this experience helping with your career or advanced degree goals?

This project made me learn so much about not only Python and the infrastructure that surrounds it but also how to manage a project and execute it. Python and the basic data analysis skills I learned are skills that I will use later in my research, so this was one of the best ways for me to start my research experience and hopefully my career.

What is the best advice you’ve gotten from your faculty mentor?

He told me to branch out. Not just in this research, but for well-being in general. I have to admit that I am used to staying put, but getting out of my comfort zone is something I plan on incorporating into my life.

Why should other students get involved in this program?

I think that any student who has any questions about how things around them work should participate in research, and FURI is a great way to start that. A good mentor will not only help you on the project but also hand you advice for general success that will stick for as long as you maintain your thirst for knowledge.

Shira Shecter in lab

Photographer: Erika Gronek/ASU

Shira Shecter

For Shira Shecter, a Fulton Schools chemical engineering undergraduate student, a fascination with sustainability has inspired both her intended career direction and her FURI project. Working under Arul Mozhy Varman, a Fulton Schools associate professor of chemical engineering, Shecter is investigating how to engineer cyanobacteria to quickly produce biofuels.

Read more

What made you want to get involved in this program? Why did you choose the project you’re working on?

My mentor encouraged me to apply for FURI. As I was going to be working on my honors thesis, it made sense to apply to FURI and get funding for my research. I have always been interested in sustainability. When I graduate, I want to make the world a better place for the next generation, so metabolic engineering and biofuels have been on my radar for a few years. This is why I wanted to work in Professor Varman’s lab, as his research intersects with what I care about.

How will your engineering research project impact the world?

Cyanobacteria can be engineered to produce biofuels, but successfully doing so can take months due to the time-consuming process of transformation and segregation, which modifies the bacteria for their intended purpose. Increasing the transformation efficiency will allow scientists to work faster, and thus the field of metabolic engineering will be able to progress faster as well.

What has been your most memorable experience as a student researcher in this program? Did you have a particular “aha!” moment during your project?

So far, the most memorable experience was designing primers. It really hit me that through this research that I am doing, I am using my passion to contribute to the greater scientific community. I feel like I am making a difference and doing something meaningful with my research. It was very invigorating.

Have there been any surprises in your research?

The process of transforming two plasmids into the cyanobacteria strain PCC 11901 is taking more time than expected. While not a pleasant surprise, I understand that science has unknowns, and what is important is the ability to adapt to them. My research has become more involved with transformation, ensuring that the method is fully optimized before moving onto the segregation stage.

Why should other students get involved in this program?

No class labs will be this in-depth. This is an amazing experience that will give you a practical understanding of what you are learning about in class, rather than the more theoretical and surface-level view that classes can teach.

Diego Sanchez in lab

Photographer: Erika Gronek/ASU

Diego Sanchez

Diego Sanchez, a Fulton Schools environmental engineering undergraduate student, chose his project due to a desire he’s had since his teenage years to stop harmful algal blooms, or HABs. Working with Fulton Schools civil, environmental and sustainable engineering faculty mentors Sergi Garcia-Segura, an assistant professor, and Jesus Moron-Lopez, an adjunct faculty member, Sanchez is exploring the use of small bubbles made of ozone to reduce HABs’ presence in bodies of water.

Read more

What made you want to get involved in this program? Why did you choose the project you’re working on?

After visiting different groups and exploring the research that they were performing, I got excited about the nanobubble-algae research that was being done in Professor Garcia-Segura’s lab. The research pertains to using ozone nanobubbles to mitigate HABs in different water media such as fresh, brackish and salty water. I first learned about HABs in high school when watching the news, seeing the ecological devastation that occurred inspired me to want to be part of solutions that stopped environmental devastation. With the opportunity of FURI, I’m able to do that and aid in innovative research that improves the field of environmental engineering. Through my coursework, I have seen that the innovation of technologies for water treatment has become increasingly important as attention shifts toward our dwindling water resources. In addition to the research, I receive mentorship from other first-generation students who then became successful engineers and researchers. With the help of those that understand the path I am walking, I am confident that I will be able to flourish and achieve what I have set out to do.

How will your engineering research project impact the world?

My research aims to mitigate HABs caused by freshwater species such as Microcystis aeruginosa, or blue-green algae, and saltwater species such as Karenia brevis, or red tide, using ozone nanobubbles. M. aeruginosa and K. brevis release cyanotoxins and brevetoxins, respectively. Exposure to the former can cause liver and kidney damage, reproductive complications and impaired DNA repair, while the latter attacks the central nervous system of marine animals, leading to large fish kills.

During large algal blooms, as the individual algae die off, their decomposition can cause oxygen depletion in the water they are in, causing further harm to the aquatic ecosystem surrounding them. The U.S. can lose an estimated $10 million to $100 million from a single major HAB. Florida lost an estimated $2.7 billion from the 2018 red tide event.

To prevent this, ozone can be used to mitigate the growth of these blooms before they become unmanageable. Ozone is a highly reactive molecule composed of three oxygen atoms. When dosed into water, it has a disinfecting effect, similar to that of hydrogen peroxide or chlorine. Because of how reactive it is, it does not last long in the environment, meaning that this is a sustainable solution that will not have a lasting impact on the environment when it is used. Understanding how ozone nanobubbles behave in freshwater and saltwater will provide a broader understanding of how this technology can be used against other harmful constituents. The impact of this research is cleaner and safer water systems utilizing cheaper and more sustainable technology.

What has been your most memorable experience as a student researcher in this program? Did you have a particular “aha!” moment during your project?

To monitor the amount and size distribution of nanobubbles produced in water, we used a nanoparticle tracking analyzer. When analyzing pure water, nanoparticle concentrations were low, as expected. However, when nanobubbles were introduced, the measured nanoparticle concentration increased, confirming their presence.

To evaluate ozone’s effect in real environmental conditions, we collected freshwater samples containing naturally occurring nanoparticles such as dirt, debris and organic matter. In these real-world water samples, both the concentration and size of nanoparticles were initially higher due to these impurities. Unexpectedly, when the water samples were exposed to ozone over the course of one hour, the average nanoparticle size decreased with time. This reduction suggests that ozone reacted with the suspended particles, demonstrating its strong oxidizing capability. This was my “aha” moment, witnessing the power of ozone, proving what I have learned in class.

Have there been any surprises in your research?

When working with algae, you learn some interesting behaviors and techniques when taking care of it. We keep the algae in a closed-off area with a natural light emitter, and each species is maintained in a separate flask. Usually when thinking about algae, the common thought is a plant-like organism that stays stagnant in water and moves with the current. K. brevis, on the other hand, is a dinoflagellate, meaning that it has flagella, whip-like organelles that allow them to move in water. In its flask, M. aeruginosa is usually uniform, making the water green and cloudy. However, when looking at K. brevis, all the organisms are clumped in the direction of the natural light lamp. I found this behavior fascinating because it highlights how even microscopic organisms can adapt to maximize photosynthetic energy production.

How do you see this experience helping with your career or advanced degree goals?

I see the FURI program as a way to step into the world of research, where the answers are not found in a textbook. It has helped me build my confidence to work through open-ended problems on my own, which is a skill that is invaluable no matter what my career path is going to be. I’ve also learned how to share my findings, not just in technical terms but in a way that makes sense to non-engineers, like my friends and family who aren’t as immersed in this research as I am. Additional skills that I’ve earned are technical writing, problem identification and collaboration that aids in furthering a common goal.

What is the best advice you’ve gotten from your faculty mentor?

The best advice that I have received from my faculty mentor was that I have to know “what game I want to play.” In other words, I must know what steps I need to take to reach my career goals. The “game” requires me to move with agency, where every step I take in my career must be led with meaning and intent. That mindset has helped me act more purposefully, not just saying “yes” to everything but choosing what will help me grow toward being a well-rounded professional.

Why should other students get involved in this program?

The reason I would recommend FURI is because it opens a new avenue for students who did not know that research was an option for them. It takes concepts that we learn in class and concentrates them in a way that is challenging, exciting and rewarding. I have had the chance to work with faculty mentors and doctoral students who I would not have met if it were not for FURI. Despite it being an intimidating task to find a mentor and apply, I would recommend the program to any Fulton Schools student.

Sidra Elsaady in lab

Photographer: Erika Gronek/ASU

Sidra Elsaady

Sidra Elsaady, an undergraduate engineering student specializing in electrical systems engineering, decided to join FURI to see how the theoretical concepts she was learning in her classes applied to the real world. Supervised by Nick Rolston, a Fulton Schools assistant professor of electrical engineering, Elsaady is testing different treatment methods’ effects on semiconductor device packaging quality to improve the reliability of electronics.

Read more

What made you want to get involved in this program? Why did you choose the project you’re working on?

I joined this program because I really wanted to take what I was learning in electrical systems engineering and see how it works in the real world. I’ve always liked connecting the science side of things with the hands-on engineering side, and this project gave me that chance. Honestly, a big part of it was just wanting to be in a real lab for the first time, not just classroom labs where everything is already set up for you. Being surrounded by the equipment and learning how to actually use it was something I’d been curious about for a long time. I also wanted to figure out if research was something I’d truly enjoy, and this felt like the perfect way to test that. It turns out I love it; the mix of problem solving, experimenting and learning new processes in semiconductor manufacturing has been really motivating.

How will your engineering research project impact the world?

What I really like about this project is that it shows how even the smallest details in engineering can completely change the performance of something as sophisticated as a semiconductor device. I’m testing different treatments like vacuum-based plasma, open-air plasma and ultraviolet-ozone, to see how they affect surface roughness, wettability and other key properties in packaging. These aren’t just random measurements; they’re what make the difference between a device that lasts for years and one that fails too soon. If treatments like open-air plasma or ultraviolet-ozone can work as well as or even better than traditional vacuum systems, that could mean more efficient, lower-cost and more sustainable manufacturing.

What has been your most memorable experience as a student researcher in this program? Did you have a particular “aha!” moment during your project?

My most memorable experience has been getting trained on the equipment and realizing I was finally working in a real research lab. Before this, most of my lab work had been in classroom settings where the experiments were already planned out and very controlled. Walking into a research lab felt completely different. The scale, the freedom and the advanced equipment for plasma treatments, profilometry and more made me feel like I was stepping into the world of real engineering. Being able to actually use the equipment myself and learn how different experiments are run was motivating and exciting. It showed me how much more there is to explore in semiconductor research and made me want to keep building my skills and stay curious about everything this field has to offer.

How do you see this experience helping with your career or advanced degree goals?

This project has helped me realize how much I enjoy doing research. Before starting, I wasn’t sure if research was the right fit for me, but being in the lab and working through experiments showed me that this is something I want to keep doing. I’d like to continue my research in this field and then branch out into more areas of semiconductor research over time. The skills I’ve gained are things I can carry with me, whether I go into industry or pursue an advanced degree. More importantly, this experience confirmed that I want to keep building on what I’ve started, and I see it as the beginning of a longer journey into semiconductor manufacturing and processing.

Why should other students get involved in this program?

Other students should get involved in this program because it gives you the freedom to explore areas of research you wouldn’t normally get to dive into as an undergraduate. You can start your own project or join an existing one, which means you can really shape the experience to your interests. It’s not just about the material you cover in class; you get the chance to explore topics and ask questions that would never even come up in a regular lecture, and you get to apply that knowledge in real ways through your own project.

For me, this program confirmed how much I enjoy research, but it’s also a great way for any student to figure out whether research is something they want to keep pursuing. Even if you end up in a completely different field, the experience of working in a real lab, gaining technical skills and taking ownership of a project sets you apart and gives you a perspective you can’t get from the classroom alone. It’s a chance to explore new topics, grow as an engineer, and find out what excites you most.

About The Author

TJ Triolo

TJ Triolo is a marketing and communications project coordinator in the Ira A. Fulton Schools of Engineering. He's a 2020 graduate of ASU's Walter Cronkite School of Journalism and Mass Communication. After starting his career in marketing and communications with a car wash company in Arizona, he joined the Fulton Schools communications team in 2022.

ASU Engineering on Facebook